S1100 series frequency converter of three 碁 of SANCH
Brand: SANCH – three
Name: S1100 series frequency converter of three of SANCH
Type: S1100-4T2.2G
About products:
SANCH Taiwan three frequency converters series S1100 create the individualized products, offer the developing platform made to measure to customer, offer a trade to solve the square eucalyptus specializedly, for instance: Stone material trimming shears specialized and flocking machines specialized and central air conditioner specialized, shake entangling machine to be specialized, etc.The products are detailed:
SANCH Taiwan three frequency converters series S1100 create the individualized products, offer the developing platform made to measure to customer, offer a trade to solve the square eucalyptus specializedly, for instance: Stone material trimming shears specialized and flocking machines specialized and central air conditioner specialized, shake entangling machine to be specialized, etc.Input the voltage class: 440V
Output
Applicable motor power: 2.2KW
Export the rated current: 5.5A
The output voltage of maximum: Input the power correspondingly
Overload capacity: 150% of the specified output current Run for 65 seconds
Power
The number of phases, voltage, frequency: Three phases 380-460V 50/60Hz
The voltage, frequency permit the mobility scale: Voltage: Frequency 15% of ±: ± 5%
Input current (A) : 7.2A
Biasing characteristic
Control mode: Adopt SVPWM modulation technology (V/F controls and has no vector control of speed)
Export the frequency domain: 0.01~400.0Hz
The frequency presumes resolution: 0.01Hz
The resolution of output frequency: 0.01Hz
PWM carrier frequency: But since 2~10K adjusts
Running torque is promoted: Reachable 150% of the nominal torque when 2Hz of starting moment of automatic running torque is promoted and automatic slip compensation
The frequency jumps: Can presume 3 points from 0.01~400.0Hz
Accelerate /deceleration time: 0.01~600.0 second (2 add / can set for independently separately by deceleration time)
Stall and prevent the reference position: Can presume with 50~200% of the rated current of the driver in accordance with the motor load characteristic
D.c.injection braking: When it stop can 0.01~400.0Hz operation, what has been lasted 0-100% of electric currents rated current,0.0-60.0 second such as starting time, 0.0-60.0 second such as deceleration time
Braking torque: 20% (connect reachable 125% of braking resistance chosen) (1-25HP installs the electric crystal inside and brakes, 30HP must connect and brake the die set of the unit)
V/F curve: But V/F curve presumed
Operating characteristic
The frequency presumes signals: Several manipulator by The key is presumed; Outside terminal 0-10VDC, 4-20mADC, tandem communication port (RS-485)
Operate and operate signals: The digit manipulator can be by ” RUN ” ,” STOP” ” JOG” The key is carried out; The outside terminal is two-wire (Fwd/Stop, Rev/Stop, Run/Stop, Fwd/Rev) /3 is line type to operate one inch of sports to rotate, tandem communication port (RS-485)
Intelligent leading-in terminal: 16 segments can preserve the speed to switch over, the first / second plus deceleration time is switched over; It is forbidden to add the deceleration, the end is input in the outside, inching motion operates UP/DOWN frequency terminal to presume, count terminals
Intelligent lead-out terminal: Operate, frequency reach output is non-zero to count, reach output rapidly, pass running torque, export, external interruption instruction, low voltage output, the instruction of mode of operation, the unusual trouble is exported, the outside is unusually cut off
The image output of the analogy: Correspond to the actual output frequency or output current
The joint of the fault signal: Joint ” ON ” while exchanging the driver trouble (one ” C ” Electrical relay of the joint or two opened collecting electrode to export
Built-in function: The upper and lower limits of output frequency presume, the black out of the instant is restarted, the unusual trouble is restarted, S curve adds the time setting of the deceleration, automatic voltage regulation is exported and regulated, the outcoming signal of the digit frequency, unusually record, the parameter is locked, the parameter is dispatched from the factory and reset, forbid the reversal, the excess current stalls to prevent, over voltage stalls to prevent, the electronic heat works up the Relay
Protect the function: Over voltage, excess current, low-voltage, external unusual interrupt input, excess load of the electrical machinery, the excess load of the driver, the excessive heating of the driver
Digit manipulator: Include 8 function keys, 7 sections of LED display units of 5 figures, 5 status indication LED lamps, can presume the frequency, reveal actual output frequency, output current, user make the unit parameter by oneself and have a look around and revises and presume and the parameter is locked, unusual executable to turn round, stop, reset, rotate clockwise trouble / reversal, inching motion
Environment
OAT: -10 ℃ to +50 ℃( Need to open the dust cap from +40 ℃ to +50 ℃)
Storage temperature: -20 ℃ to +60 ℃
Operate the ambient humidity: There is no moisture condensation under 90% RH
Installation height: Under the height 1000m, there are no gas of corrosivity, liquid, dust
Shake: 9.80665m/S² under 20Hz; ( 1g) ,20~50Hz5.88m/S² ( 0.6g)
More product information details please see company’s websiteshttp://www.xmqic.com
