The thunder has a match and walks into the electrical machinery each other

Mar 25th, 2012

Brand: The thunder has a match

Name: The thunder has a match and walks into the electrical machinery each other

Type: 35HS01

About products:

Our company supply the thunder and comparable to the electrical machinery in a large amount

The products are detailed:

  • Main characteristic

    35 The series walk into the electrical machinery each other

    Common specification

    From step to precision

    +5% (whole step, empty load)

    Wen Sheng

    80° CMax

    Ambient temperature

    -10° C — +50° C

    Insulating resistance

    100MΩ min.500VDC

    Able to bear pressing

    500VAC for one minute

    The radial beats

    0.06 Max.(450g-load)

    Beat axially

    0.08 max.(450g-load)

    Technical specification

    Model No.

    Count

    From step to corner

    Keep the torque

    Specified electric current

    Looks inductance

    Looks resistance

    The lead wire quantity

    Rotor inertia

    Orient the torque

    The electrical machinery weight

    Machine height

    (°)

    N.M

    A

    mH

    Ohm

    g.cm2

    Kg.cm

    Kg

    mm

    35HS01

    2

    1.8

    0.07

    0.4

    16

    35

    4

    12

    0.1

    0.17

    26

    External dimension

    Wiring diagram

    Not relevant to download the information of the materials!

    In order to walk into the electrical machinery He

    It is a kind of special special electrical machinery used for controlling to walk into the electrical machinery accurately in position and speed. The greatest characteristic of walking into the electrical machinery is it ” The figure ” ,Send every pulse signal that come over as to controller, walk into electrical machinery turn round in a fixed angle (abbreviated as one step) under push of driver their ,The following picture is shown. A bunch of pulses walk into the electrical machinery and operate a corresponding distance continuously such as receiving. Can pass and control the pulse frequency at the same time, control the electrical machinery rotational speed directly. Easy to learn and use because operation principle it walk into electrical machinery,whose name is with low costs (to servo) , electrical machinery and driver are difficult to damage, very suitable for microcomputer and one-chip computer to control, so has found more and more extensive application in the control apparatuses of all trades and professions in recent years.

    Walk into kind and characteristic of the electrical machinery

    Walking into the electrical machinery has three kinds of main types on the structure: Response type (Variable Reluctance, VR) Permanent magnetism type (Permanent Magnet, PM) With the composite (Hybrid Stepping, HS) .

    Response type
    There are winding, rotor that are made up of soft magnetic material at the stator. Simple in construction, with low costs, the step is small to the angle, can reach 1.2& deg; , dynamic performance bad and efficiency low, generate heat great, it is difficult for dependability not to guarantee.

    Permanent magnetism type
    Permanent magnetism rotor to walk into electrical machinery make of permanent magnetism material, number with same number extremely of stator extremely of rotor. It features that of good performance and outputting the moment greatly dynamically, but this kind of electrical machinery is bad in precision, the square angle of step is big (it is generally 7.5& deg; Or 15& deg) .

    Composite
    The advantage of the composite walking into comprehensive response type and permanent magnetism of the electrical machinery type, adopt the permanent magnetism material at heterogeneous winding, rotor at its stator, have a plurality of small teeth in order to improve the square precision of the step at rotor and stator. It features that outputs the moment great, of good performance dynamically, the step is small to the angle, but the structural complicatedness, cost are relatively high.

    The winding is divided according to the stator, there are two phases, three phases and equal series five in all. The most popular one composite each other walks into the electrical machinery, account for more than 97% of the market share, its reason is that cost performance is high, the result is good after mixing and subdividing the driver. The basic step of electrical machinery 1.8& deg from corner; /Step, mix half step behind the driver, step reduce from corner for 0.9& deg; ,Mix, subdivide step their can subdivide the intersection of Damien and 256 times (0.007& deg from horn behind the driver; /Little step) . Because reasons such as frictional force and making precision,etc., it is slightly low to control the precision actually. Walking into the electrical machinery the samely can mix different drivers that subdivide in order to change precision and result.

    The thunder has a match and walks into the electrical machinery series

    Composite match two phase, three-phase thunder walks into the electrical machinery, adopts high-quality cold-rolled steel sheet and high temperature resistant permanent magnet to make, the product specification contains 35-130 ranges. Warm to promote the low characteristic with high dependability, because it has good internal damping characteristic, therefore it is stable to walk, there is no shaking area. The ones that can meet under different trades, different environments use the demand.
    Thunder’s match adopts three phases of technology research and development of the patent to walk into the electrical machinery and drive the system, solve tradition walk into electrical machinery, creep, have the intersection of resonance and district, the intersection of noise and loud at a high speed little starting the intersection of frequency and low and the intersection of driver and the intersection of dependability and shortcoming such as being poor torsion at a low speed better, have some operation characteristics of exchanging servo electrical machinery, it runs the result can compare favourably with imported products.

    Walk into the electrical machinery naming rule each other

    <>

    Have example, say Seat No. 57mm, each other composite, 1.8 degrees, torsion 0.9Nm from step to corner, design serial number 01, unilateral to offer the electrical machinery of the axle.

    Three phases walk into the electrical machinery naming rule

    <>

    Have example, say Seat No. 57mm, composite three-phase, 1.8 degrees, torsion 0.9Nm from step to corner, design serial number 01, unilateral to offer the electrical machinery of the axle.

    Walk into the selecting tabulation of the electrical machinery each other

    Count

    Appearance

    Type

    Quiet torsion (NM)

    Step from horn (& ordm)

    The lead wire is counted

    Electric current of looks

    Resistance (& Omega)

    Inductance (mH)

    Length L (mm)

    Rotor inertia (g.cm&sup2)

    Weight (kg)

    Right to mix the driver

    Series connection

    Connect in parallel

    Two phases

    35

    35HS01

    0.07

    1.8

    4

    0.4

    35

    8.0

    28

    12

    0.17

    M415B/DM320/M325

    39

    39HS02

    0.065

    1.8

    4

    0.6

    15

    16

    34

    20

    0.18

    M415B/DM320/M325

    42

    42HS02

    0.22

    1.8

    4

    0.4

    12.5

    21

    40

    57

    0.24

    DM320/DM422C/DM432C/
    DM556/DM856/M542V2.O/
    ND556/ M415B/M325

    42HS03

    0.34

    1.8

    8

    0.7

    1.4

    4.6

    4.0

    48

    82

    0.34

    57

    57HS06

    0.6

    1.8

    8

    1.4

    2.8

    1.35

    1.8

    55

    145

    0.6

    DM422C/DM432C/DM556/
    DM856/M752/M542/
    M860/M880A/MA550/
    MA860/H850/ND556/
    ND882/M415B/M325

    57HS09

    0.9

    1.8

    8

    2.1

    4.2

    0.8

    1.2

    54

    260

    0.6

    57HS13

    1.3

    1.8

    8

    2.0

    4.0

    1.0

    2.1

    76

    460

    1.0

    57HS22

    2.2

    1.8

    8

    2.8

    5.6

    0.67

    1.8

    76

    480

    1.1

    86

    86HS35

    3.0

    1.8

    8

    2.0

    4.0

    1.4

    3.9

    65

    800

    2.0

    DM556/DM856/M752/
    M860/M880A/MA550/
    MA860/H850/MA860H/
    ND882/ND1182/ND2282/
    M535/MD2278

    86HS38

    3.8

    1.8

    8

    3.0

    6.0

    0.6

    2.7

    71

    1200

    2.6

    86HS45

    4.5

    1.8

    8

    3.0

    5.9

    0.8

    3.5

    79.5

    1400

    2.3

    86HS85

    8.5

    1.8

    8

    3.5

    7.0

    0.95

    5.2

    118

    2800

    3.8

    110

    110HS12

    12

    1.8

    4

    5.0

    0.95

    15

    99

    5500

    5.0

    MA860H/ND1182/ND2282/MD2278

    110HS20

    20

    1.8

    4

    6.5

    1.15

    18.9

    150

    11000

    8.4

    MA860H/ND1182/ND2282/MD2278

    130

    130HS27

    27

    1.8

    4

    6.0

    0.65

    13.8

    227

    35000

    13

    ND2282/MD2278

    130HS45

    45

    1.8

    4

    7.0

    0.9

    9.5

    283

    48400

    19

    ND2282/MD2278

    Three phases walk into the selecting tabulation of the electrical machinery

    Count

    Appearance

    Type

    Quiet torsion (NM)

    Step from horn (& ordm)

    The lead wire is counted

    Electric current of looks

    Resistance (& Omega)

    Inductance (mH)

    Length L (mm)

    Rotor inertia (g.cm&sup2)

    Weight (kg)

    Right to mix the driver

    Series connection

    Connect in parallel

    Three phases

    57

    573S05

    0.6

    1.2

    6

    5.2

    1.3

    1.7

    50

    110

    0.6

    3DM683/3ND583/3ND883

    573S09

    0.9

    1.2

    6

    3.5

    0.7

    1.7

    56

    300

    1.0

    3DM683/3ND583/3ND883

    573S15

    1.5

    1.2

    6

    5.8

    0.7

    1.35

    76

    480

    1.0

    3DM683/3ND583/3ND883

    86

    863S22

    2.26

    1.2

    6

    5.0

    0.96

    2.4

    71

    1100

    1.7

    3DM683/3ND583/3ND883/
    3ND1183/3ND2283

    863S42

    4.26

    1.2

    6

    5.0

    1.2

    4.2

    103

    2320

    2.85

    863S68H

    6.78

    1.2

    6

    2.3

    7.6

    33

    135

    3300

    4.0

    How to choose to walk into electrical machinery and driver

    • Judge how to need the energetical square: The quiet torsion chooses to walk into one of the main parameters of the electrical machinery. While supporting greatly, need to adopt the energetical square electrical machinery. When the moment index is big, the appearance of the electrical machinery is great too.

    • Judge the electrical machinery operates the speed: When the rotational speed is expected much, should select looks greater with less inductance electrical machinery of electric current, in order to increase the power to import. Voltage that and adopt while choosing the driver higher and supply power.

    • Chosen the installation specification of the electrical machinery: For instance 57, 86, 110 grades, mainly demand to have something to do with the moment. • Confirm the localization precision and shake the requirement situation of the respect: Judge whether to need to subdivide, need to subdivide more or less.

    • The voltage chooses the driver according to the electric current, subdividing and supplying power of the electrical machinery.

  • No comments yet.