The thunder is comparable to series M of new generation and walk into the driver of the electrical machinery

Mar 24th, 2012

Brand: The thunder has a match

Name: The thunder is comparable to series M of new generation and walk into the driver of the electrical machinery

Type: M542 V2.0

About products:

Supply from stock

The products are detailed:

M series products overview driver type of new generation

Input the voltage

Electric current range ( Electric current of peak value) ( A)

External dimension (MM)

Right to mix the electrical machinery

Control method

Control signal

M542 V2.0

24-50 VDC

1.0-4.2,8 shelves are adjustable, the resolution ratio is about 0.45

11875.534

42,57

Shan / one pair of pulses

Difference is divided

M752

36-75VDC

1.26-5.2,8 shelves are adjustable, the resolution ratio is about 0.5

11875.534

57,86

Shan / one pair of pulses

Difference is divided

M860 V5.0

24-80 VDC

2.4-7.2,8 shelves are adjustable, the resolution ratio is about 0.6

1519748

57,86

Shan / one pair of pulses

Difference is divided

MA860

24-60 VAC

2.4-7.2,8 shelves are adjustable, the resolution ratio is about 0.6

1519748

57,86

Shan / one pair of pulses

Difference is divided

MA860H

36-80 VDC

2.4-7.2,8 shelves are adjustable, the resolution ratio is about 0.6

1519748

86,110

Shan / one pair of pulses

Difference is divided

Walk into the driver M542 V2.0 little step of the electrical machinery and subdivide and count 15 kinds, the biggest step number is that 25000Pulse/rev working peak value electric current range is 1.0A- 4.2A, export electric current, have 8 shelf in all, resolution ratio of electric current whether 0.45A have automatic half flow, excessive pressure and crossing flowing to protect when the function It is 1.26A- 5.2A to walk into the electrical machinery driver M752 working peak value electric current range, there are 8 shelves in all to export the electric current, resolution ratio of electric current whether 0.5A have automatic half flow, excessive pressure, owe, press and cross, flow the intersection of person who protect and function It is 2.4A- 7.2A to walk into the electrical machinery driver MA860H working peak value electric current range, there are 8 shelves in all to export the electric current, resolution ratio of electric current whether 0.6A have automatic half flow, excessive pressure, cross, flow the intersection of person who protect and function It is 1.0A- 5.0A to walk into the electrical machinery driver MA550 working peak value electric current range, there are 8 shelves in all to export the electric current, resolution ratio of electric current whether 0.5A have automatic half flow, functions such as excessive pressure, overprotection,etc. It is 2.8A- 7.8A to walk into the electrical machinery driver M880A working peak value electric current range, there are 8 shelves in all to export the electric current, resolution ratio of electric current whether 0.7A have automatic half flow, excessive pressure, cross, flow the intersection of person who protect and function It is 2.4A- 7.2A to walk into the electrical machinery driver MA860 working peak value electric current range, there are 8 shelves in all to export the electric current, resolution ratio of electric current whether 0.6A have automatic half flow, excessive pressure, cross, flow the intersection of person who protect and function It is 2.4A- 7.2A to walk into the electrical machinery driver M860 V5.0 working peak value electric current range, there are 8 shelves in all to export the electric current, resolution ratio of electric current whether 0.6A have automatic half flow, excessive pressure, cross, flow the intersection of person who protect and function M series summary of new generation

The thunder is comparable to a new generation M Serial low-cost high performance walk into the product introduction of the driver

Product performance

The third generation of low-cost high performance drives the products step by step;
The accurate electric current is controlled, the electrical machinery generates heat few;
Seven types, the products contain 24~120VDC or 18~80VAC working voltage range;
High-speed performance is specially good, it is higher by 20% than the general driver;
Mix various inductance electrical machineries automatically and rightly, have optimum performance;
Operate steadily at a low speed, there is no all kinds of step phenomenon;
16 kinds of little steps are subdivided, include 2~256 and 5~200 and subdivide the series;
Can substitute and upgrade the varied always M series products.

A new generation M Serial summaries

New M whether the intersection of thunder and whom match succeed in developing ten year drive product step by step while being the third generation of in series. Than the original M series product (M860/MA860/M542/ ME752,etc.) this series Have fine performance and low cost, to have to drive products step by step cost performance most at the Chinese market. Traditional M series product ‘ First generation) Will withdraw from the market progressively.

New the intersection of M and series walk into driver, adopt the intersection of thunder and the intersection of match and multiple the intersection of patent and control technology that Company research and develop independently. New series M adopt the high-speed moment to promote technology, make the same electrical machinery under the same voltage, electric current, the speed and accelerating performance to obviously promote than other drivers, nearly improves by 20%, as shown in Fig. 1.


This serial drivers were initiated in our company ” The electric current control technology of the pure string ” On the foundation, have further developed and adopted the latest ” accurate electric current control technology of pure string ” . Fig. 2 reveals that adopt the accurate electric current control technology of the pure string, can reduce the electric current line wave effectively, make the electrical machinery generate heat and drop 10- 20 ℃.

The new M series electrical machinery control parameter makes the electrical machineries of different inductance can give play to optimum performance under various voltage and generate heat the most low from the applicable technology. Thus prevent a lot of drivers from being difficult to adapt to various electrical machineries, performance lay electrical machinery, take place getting hot under high pressure while being bad to little the intersection of inductance and warm to rise extremely high, lay to big the intersection of inductance and the intersection of electrical machinery and high-speed the intersection of moment and too low, low pressure electrical machinery, as shown in Fig. 3.

New the intersection of M and series walk into driver, adopt tertiary figure strain the intersection of wave and technology, raise the interference-free performance of the driver greatly, inhibit the impact on driver of miscellaneous wave, prevent the driver from acting by mistake effectively, improve the stability of precision and apparatus processed.

Every type characteristic and making a reservation

New series M have seven types in all, four sections are input (M542/M752/M860 V5.0/M880A) for direct current ,Three input all for hand in direct current (MA550/MA860/MA860H) ,Can match composite various of 42/57/86/110 of the waiting for machine seats each other and walk into the electrical machinery, is suitable for various industrial automation and office automation use. Among them the working power of MA550/MA860/MA860H three types can be inserted from the power transformer directly, do not need to increase the power cowling panel extraly, can simplify users’ wiring and save the departmental cost.

M542 V2.0 to substitute M542 V1.X and ME542 V1.X two type, overcome electrical machinery its run noise to be loud generating heat loud enough for characteristicking such as being high by smoothness mainly.

M752 presses the driver in the small and exquisite, high-speed performance of a volume is excellent, can upgrade and replace types such as M742, M840, M839,etc..

M860 V5.0 whether one high-speed performance press the driver in the excellent direct current, can replace M860 directly.

MA860 whether one hand in in the whom direct current can input pressing drivering, directed primarily to, carve, require the intersection of level and the intersection of speed and of good performance with low costs use.

MA860H to step up edition one MA860, working voltage 40~80VAC in range, lead the fan and dispel the heat by force, suitable for walking into the electrical machinery (6~15NM) of 86 and 110 machine seats The high-speed sports while carrying out.

Products naming rule

New M Serial driver type preview tables

Driver Type

Substitution Type

Electric current range Electric current of peak value)

Input the voltage

External dimension mm
Weight

Form a complete set Electrical machinery

Control Way

Control signal

M542 V2.0

M535, M542, ME542

1.0A 4.2A, 8 shelves are adjustable, the resolution ratio is about 0.45A

24- 50VDC

118 75.5 34
About 271g

42,57

Shan / one pair of pulses

Difference is divided

M752

M840, M839, ME742

1.26A 5.2A, 8 shelves are adjustable, the resolution ratio is about 0.5A

36- 75VDC

118 75.5 34
About 280g

57,86

Shan / one pair of pulses

Difference is divided

M860 V5.0

M860

2.4A 7.2A, 8 shelves are adjustable, the resolution ratio is about 0.6A

24- 80VDC

151 97 48
About 570g

57,86

Shan / one pair of pulses

Difference is divided

MA860

M860, M880, MD882

2.4A 7.2A, 8 shelves are adjustable, the resolution ratio is about 0.6A

24- 60VAC

151 97 48
About 570g

57,86

Shan / one pair of pulses

Difference is divided

MA860H

2.4A 7.2A, 8 shelves are adjustable, the resolution ratio is about 0.6A

36- 80VAC

151 97 48
About 580g

86,110

Shan / one pair of pulses

Difference is divided

Working environment

Cooling way

Natural cooling or extra radiator

Enable
Use
Ring
Border

Occasion

Can’t be putting by other apparatus that is generating heats, should avoid the dust, oil fog, corrosivity gas, strong and shake the place, it is forbidden to have flammable gas and conductive dust;

Temperature

0- -+50 ℃

Humidity

40- 90%RH

Vibration

5.9m/s2MAX

Keep the temperature

-20 ℃- 125 ℃

Use attentive matters

The choices of A, working power: As inputting the power when being a direct current source, its voltage of input can’t be in order to exceed the highest working voltage of the driver, it should be smaller than 5%, is need to connect and electrolyze the electric capacity when the wave voltage of the line is greater than 5% to input the line unexpected turn of of the power voltage. Need to pay attention to capacitive polarity and able to bear pressing while connecting and electrolyzing the electric capacity, it should be in order to input more than 1.3 times of the power voltage to electrolyze the capacitive one and able to bear pressing. When inputting the power as the alternating current source, its voltage of input can’t be in order to exceed the highest working voltage of the driver and be lower than the lowest working voltage, the frequency is 50/60Hz.

B, at the time of installation, should pay attention to the airiness within the electric cupboard, guarantee the driver has good heat abstraction. For having driver of the heat-dissipating air blower, guarantees the tunnel is unblocked at the time of installation. The naturally cooled driver, should install it on bigger and thicker metal one for depending on. As to the thing that while installing many drivers within the same cabinet, had better install the heat-dissipating fan on the cabinet, keep the airiness within the cabinet.

C, wire at,if you can’t want, guarantee outer cover of driver and apparatus and protection of cupboard wiring goods electric. Control the line had better be adopted and shielded the line, pay attention to separating with strong electricity such as the line or cable of electrical machinery during wiring. While wiring, forbid tin-platedly on the end of a thread connecting with wiring end son, otherwise may be greatly exposed to the resistance and change, overheated and damaging the end son, generally insert directly.

D, forbid electrification pull out strong electric the intersection of end and son to insert driver, electrification pull out insert strong electric the intersection of end and son cause inducting electro-motive force, burning out drivering instantlying enormous.

Wiring sketch map

For the communication that made control system and driver normal, avoids interfering with each other, isolate the input signal in the mere lotus root device of built-in high speed of the driver, PUL, DIR, ENA three No. the intersection of signal and difference of adopting person who divide into the intersection of interface and the intersection of circuit and very applicable difference divide signal, the intersection of single-end and altogether overcast and interface such as north together.

The commonly used connection way is as follows,

1,The open way, connect PUL +, DIR + together and regard as + 5V that the altogether open end received the outside system with EN + altogether, the pulse signal inserts PUL end, the direction signal inserts DIR – -The end, can make the signal insert ENA- end;

2,The overcast way, answer PUL-, DIR- and ENA- together, regard as together overcast end is answered in GND of the system together, the pulse signal inserts PUL + end, the direction signal inserts DIR + end, can make the signal insert ENA + end;

3,Difference divides the way, the pulse signal of the controller, the intersection of direction and signal and make, can shoulder end, insert PUL +, PUL-, DIR +, DIR-, ENA + and the intersection of ENA- and end to reach the driver directly respectively by signal. The interface sketch map, the following picture, is shown:

When adopt it at the time of the male genital and overcast way altogether altogether, the voltage of control signal offered in the controller is greater than 5V, signal need, connect limit, shed resistance at the line. Among them when the voltage of control signal is 12V, need to connect the resistance of 1K 1/4W; When the voltage of control signal is 24V, need to connect the resistance of 2K 1/4W.
For avoid, act and offset by mistake, PUL, DIR, ENA should meet, will certainly control the intersection of time sequence and requirement, the following picture is shown:

Explanatory note:
( 1) t1: ENA (can enable signals) Should advance DIR at least 5μ s, it is high to confirm as. Generally speaking propose ENA + and ENA – unsettled.
( 2) t2: DIR PUL at least ahead of time drops to confirm its state is high or low along 5μ s.
( 3) t3: The pulse width is not smaller than 1.5μ s at least.
( 4) t4: The low level width is not smaller than 1.5μ s.

Apolegamy of the electrical machinery

Users mainly consider the torque of the electrical machinery and size of the specified electric current while choosing to walk into the electrical machinery. It is decided by the electrical machinery size that the electrical machinery outputs the torque size. The electrical machinery of big size exports the torque bigger; The size of electric current of the electrical machinery mainly relates to inductance, the little inductance electrical machinery is of good performance at a high speed, but the electric current is relatively big. It need user load torques with system, transmission than, running speed, lasting deceleration,etc. factor to estimate whether last the output torques of electrical machinery selected, consider that installs factors such as the size,etc. with electrical machinery at the same time, to choose appropriately to walk into the electrical machinery.

Users can estimate the torque of electrical machineries needed according to following formula:
T electrical machinery =C (Jε +T supports)
J: The inertia ε of turning supported: The largest angle supported adds the speed C: Safety coefficient, recommend the value 1.2- 1.4
T supports: Support torque, support effectively, frictional force, the intersection of transmission and the intersection of efficiency,etc. and torque of resistance greatly most
T electrical machinery: The torque that the electrical machinery needs exporting, the electrical machinery torque chosen should be greater than this value

Composite progressive electrical machinery export to the following characteristics mainly torque:
The bigger the real electric current of the electrical machinery is, export the the bigger torque, but copper of the electrical machinery is decreased (P =I2R) The bigger, the more manily electrical machineries generates heat;
The driver supplies power the voltage is the higher, the greater the high-speed output torque of the electrical machinery is;
High speed than in export torque at a low speed it is little,the following picture square characteristic picture is show frequently.

Walk into the wiring of the electrical machinery
The M series driver can be used for driving 4, 6, composite the two phase of Line 8, four phases to walk into the electrical machinery, 1.8 0.9 degrees very applicable from step to horn. Walk into the electrical machinery as to 6, Line 8, the connecting the electrical machinery performance of the law of different coils has significant differences, the following concrete picture is shown:

Input the voltage and export the exertion of the electric current
M series driver can drive every producer walk into the electrical machinery while being composite each other outside the China, in order to obtain the satisfactory drive result most, need to choose the rational voltage of power supply and presume the electric current. The level of the input voltage of the driver determines the high-speed performance of the electrical machinery, and the driver outputs the electric current and presumes the moment which determines the electrical machinery.

The driver inputs the settlement of the voltage
Generally speaking, supply power voltage to be high, electrical machinery moment large when the high speed, can lose the step prevent the high speed from. But the voltage is too high will cause the overvoltage protection of driver, the electrical machinery generates heat more, may even cause the driver to damage. While working under the high pressure, the vibration that the electrical machinery moves at a low speed will be a little greater.

The driver exports the settlement of the electric current
As to the same electrical machinery, when the presuming value of electric current is the bigger, the greater the electrical machinery outputs the moment, but electrical machinery and driver generate heat relatively more serious even when electric current old. The size of the concrete caloric value not only has something to do with the settlement value that the driver exports the electric current, also relate to sport type and residence time. The following settlement ways adopt and walk into the specified electric current value of the electrical machinery for reference, but the optimum value in practical application should be adjusted on this basis. Rise light at 40 ℃ in principle and warmly, can look at, need, strengthen the intersection of electric current and person who presume in order to increase the intersection of electrical machinery and output power (raise, output moment and improve at a high speed responding to) while being appropriate .

15- 30 minute such as test run after the electric current is presumed, electrical machinery warm to enter large at 70 ℃ for instance, should reduce the intersection of electric current and person who presume. But but hot number value that the general situation sets up the output electric current of the driver into an electrical machinery and presents warm-heat evil while working for a long time.

No comments yet.