1117 type DEUBLIN has no bearing type to cool and connect

Jan 19th, 2012

Brand: Deublin – Du BoLin

Name: 1117 type DEUBLIN has no bearing type to cool and connect

Type: 1117-058-116

About products:

U.S.A. Deublin rotates and connects – -It is the biggest specializing in the producer that various precision rotated connecting, steam connecting, siphon pipe and all kinds of internal swelling tubes in the world.

The products are detailed:

1117 type DEUBLIN has no bearing type to cool the piecing 1117-058-116

1117 type deublin has no bearing type to cool and connect the specialized ultrafast main shaft of the 1117 type piecing nowadays. The speed that a new generation connects can even exceed the best metal ball bearing. Specialized ultrafast main shaft of the 1117 type piecing nowadays. The speed that a new generation connects can even exceed the best metal ball bearing speed range.

Adopt outside support while being 1117 type, need with install the bearing inside, support at all. It turn by stub axle directly install at main shaft by end,but install at surfaces fixed and and turn subject inflexible accurate to in. In fact, connect and already become in the part of the main shaft at this moment one does not have vibrant whole one. Because of not having bearing project organization to adopt and quite resisting carborundum abraded to seal, can reach the low torsion and run to connect steadily to make, thus realize the service life of more permanent fault-free.

1117 type another characteristic is compact, can design very according to the original apparatus conveniently. Meanwhile, utilize Breen Du’s specialized flexibility to install the flange of transition outside, it is very apt to realize transforming.

Working parameter
The largest pressure 2000 PSI 140 bar
Maximum temperature 250 ℉ 121 ℃
The largest speed 20,000 RPM 20,000 / min
High flux the most 13.8 GPM 50 L/min
Can run under maximum pressure and maximum speed.

Hose Connection Port Ordering Number Standard E.L.S. Rotor Thread
3/8″ NPT 1117-002-110 5/8″ -18 UNF RH
1117-002-111 5/8″ -18 UNF LH
G 3/8″ (BSP) 1117-058-115 M16x1.5 RH
1117-058-116 M16x1.5 LH

No comments yet.