Continental Europe SSD direct-flow governor

Feb 23rd, 2012

Brand: Parker Hannifin

Name: Continental Europe SSD direct-flow governor

Type: 591P/590P/590C

About products:

All the intersection of control and algorithm deal with by newest the intersection of high speed and 32 a little in the 590+ series ‘ One-chip computer) Completion, control structure and one-chip computer processing speed of software package can guarantee all regulating action of controlling the return circuit is finished during the conversion time of six silicon controlled rectifier bridges of main circuit, in order to guarantee the sample time of the electric current ring is less than 3.3mS (50HZ power) Or 2.67mS (60HZ power) ,The speed can also be finished within this time while surrounding algorithms, in order to obtain superior performance.

The products are detailed:

590+ all digital direct-flow controllers are the products that American Parker Company put out, on the basis of keeping original 590C remarkable performance, improve the following:
Newly-increased here control function, can realize motor open / park and speed control by 6901 panel through operate;
Newly-increased Devicenet, Canopen, Lonworks bus communication function;
Have the same appearance, unified programming / parameter to set up way and communication way with the frequency converter 690+;
Armature voltage, armature electric current, magnetic field electric current are totally presumed by the software, no longer use the check-up board;
The built-in fan noise is lower.
1.1 Control circuit
All the intersection of control and algorithm deal with by newest the intersection of high speed and 32 a little in the 590+ series ‘ One-chip computer) Completion, control structure and one-chip computer processing speed of software package can guarantee all regulating action of controlling the return circuit is finished during the conversion time of six silicon controlled rectifier bridges of main circuit, in order to guarantee the sample time of the electric current ring is less than 3.3mS (50HZ power) Or 2.67mS (60HZ power) ,The speed can also be finished within this time while surrounding algorithms, in order to obtain superior performance.
As to the reversible device, torque (electric current) Having circulation when being reverse time very much short ‘ And can be by software) Presume, are dispatched from the factory and presumed it as 1mS, make the ring of the electric current have superior performance and response in striking load.
590+ all digital devices have a suit of silicon controlled rectifier expanded that touch off the control circuit ‘ Have already obtained the patent) ,Can obtain moving the span of control of looks of 210 degrees, can be suitable for the electromechanical pivot voltage of electricity the same in power to control unidirectional and reversibly at the same time.
One set of ones that offer in the machine since exactly fix (Self-tune) The algorithm, after can calculate control device and electrical machinery and make a machine up automatically ing, P, I constant and electric current of the ring of the electric current are a bit more intermittent, this function can get when doing a simple operation in operating the key, make the system obtain the best dynamic performance, has shortened and debugged time greatly.
The ring of the electric current meets functions, even when it is bigger that load change, the system can obtain the steady speed to respond to.
The speed surrounds PI parameter adjustment range very largely, and there is total mark that separates the function. Main performance is as follows:
Speed ratio: 100:1
Lasting accuracy: The electrical machinery is feedbacked and superior to 0.1% of the light yard to feedback and is superior to 0.01% to test the speed
1.2 is input / exported
Analog quantity is input

There is No. 5 in all, among them the distinguishing rate of a part adds a sign bit for 12, is input (range – 10V 10V) definitely as the speed ,Another user’s very free configuration of Luis 4, can be connected to the input terminus of the functional block in a flexible way.
It amounts to 3 routes for analog quantity to export, resolution ratio adds sign bit for 10, among them No. 1 is regarded as the electric current of armature and exported, other very free configuration of No. 2, as the output of any parameter.
It amounts to 9 routes for digital quantity to input, 24V, the largest electric current 15mA
The 1 preface stops The inertia of No. 1 stops No. 1 trips
No. 1 is started / operated very free configuration of No. 5
It amounts to 3 routes for digital quantity to export, 24V, the largest 30V, electric current 100mA, very free configuration of No. 3.
No. of the reference power source 1 – -No. +10VDC 1 – -No. +24VDC 1 – –10VDC
1.3 functional blocks and editors
590+ can employ to complicatedness, requirement that advanced person control with industry, through freedom of functional block and flexibility connect may realize various functions, the standard functional block is as follows,
Input / export
Call the police
Control curly
Many machines are pulled and controlled
” S ” designated in speed Type slope generator
Click and move / creep / tighten and control the function
Position ring of a speed
Digital function,etc. Ring of the electric current / speed ring
PID control
Digital slope function
Speed controlled by the digital input terminus
The rate of rising and rate of descent are controlled
Rotate the inertia to compensate
Logic function

The connection of the functional block was realized by the configuration software CongfigEdLite through the figure, such as figure 1.
590+ controllers P3 Connect with serial mouth of the computer, can realize download and uploading of the configuration. The the same or similar procedure as to function, so long as revise slightly, can download the configuration to the controller through the computer, it is very convenient to debug this pair.
590+ has a set of standard configuration while dispatching from the factory, can realize the basic control of speed.
1.4 Communication function
590+ has two communication ones, namely:
P3 : Used in the programming of computer or high-accuracy rate as the controllers / follow (cooperate with 5703) The work is used.
P1 : Bayonet COMMS (communication) The available module offers the serial communication ,Allow the controller to link together in order to form a network, pass this network, using PLC/SCADA or other intellectual apparatuses can control and make the state of all controllers continuously. The available module is as follows, Profibus,LINK,DeviceNet,Canopen,EI Bisynch/Modbus/RS422/RS485.

1.5 Man-machine interface
MMI designed in 590+ humanization makes operators set up the parameter, monitor and diagnose the trouble of the device under various conditions, at all information can in two lines of liquid crystal displays in a poor light in English clearly ‘ Or other languages) Reveal. MMI this can realize here start / stop and speed give definitely and turn to, control, assist to set up and debug. MMI can be installed on 590+ devices, can also install on the switch board panel beyond 3 meters.
Information can obtain and reveal, needn’t look for the service manual or consult the coding schedule through the catalogue type menu structure.
All functions and revealing that can set up and obtain the button of four single functions, the button of such single function can prevent the operator from obscuring the function, produce the mistake. The menu catalogue includes:
Diagnose: Reveal speed feedback and speed offset and electric current feedback and the intersection of magnetic field and electric current / voltage, analog quantity input / output and digital quantity input into / output the state message.
The parameter presumes the parameter is presumed: Used for presume the parameters of all functional blocks, such as feedback mode, magnetic field control method, way of running of speed ring,etc..


The password is protected: Some important parameters can be protected with the password, in order to avoid misoperation.
Call the police: Warning state used for revealing the present controller.
The parameter is stored: Keep the parameter revised in EEPROM.
Serial mouth: Used for presume the parameter related to communication, such as serial mouth, Potter rate, controller address,etc..
Systematic configuration: Use for, input / output to analog quantity, digital quantity input into / export etc. and go on the configuration.

1.6 The magnetic field is controlled
590+ voltage regulators offering a silicon controlled rectifier to control are controlled as the excitation of the electrical machinery, excitation control mode can control, flow, control while being permanent constant pressure and automatic weak magnetism rise the speed ‘ Permanent power) Control. Weak magnetism control, can correspond to intensity of magnetic field to stand up the intersection of electrical machinery and rotational speed, electrical machinery electric current flex point.
1.7 feedback modes
590+ has many kinds of feedback modes at your choice, they are:
The armature voltage is feedbacked
The code is feedbacked
The generator is feedbacked to test the speed
The plastic optic fibre Microtach is feedbacked
The glass optic fibre Microtach is feedbacked
1.8 Protect the function

The function is as follows, that 590+ protects
High-energy MOV’ s
Cross and flow and protect instantly
Flow against the time limit
The magnetic field fails ‘ Lose the magnetism)
The speed is feedbacked and lost
The motor is too warm

The silicon controlled rectifier module is extremely warm
The silicon controlled rectifier is touched off and failed
Internal device, network
Zero is measured rapidly
Can stop up logic
Stop up and rotate and protect


1.9 The advanced structural quality of outer cover accords with the international standard
Follow export electric current with ( 15A~2700A) ,The device has the outer covers of 6 kinds of size, attach different ventilating devices (see Table 1) ,In order to offer per kilowatt of spaces accounted for saving most. The reversible and irreversible device uses a kind of outer cover, its characteristic includes:
All is connected to the line of the device ‘ Electric wire or optic fibre) ,Adopt the bayonet attachment, it is apt to install.
All circuit board is the same, adopt and connect the inserting type to replace.
The controller accords with UL, CSA or EMC standard, mechanical manufacturers can rest assure of transporting 590+ to installing abroad.
Eurotherm Drives Company, according to BS5750, Part1/1987h and ISO9001 -1987 quality management system operation is managed

No comments yet.